Professional Tyre Inflator with Gauge Air Line Pressure Tester Tyre Pump

Check and adjust pressure using this tyre inflator with gauge, which lets you inflate, deflate and take a pressure reading with the same tool. Press the lever to inflate or deflate, then release it to check the pressure on the gauge. For twin-wheel vehicles, the twin-sided hold-on connector provides access to both inner and outer tyre valves. This professional tyre inflator from Randy Travis Machinery handles pressures up to 160 PSI / 11 Bar when connected to an air compressor. The 1/4-inch BSPT air inlet provides the connection point for the air line, and the inflator measures 75 cm in total length. With inflation, deflation and pressure checking handled by the same tool, you can move between these tasks without reaching for a separate pressure gauge. Key Features Inflation Up to 160 PSI / 11 Bar Designed to inflate tyres up to 160 PSI / 11 Bar when connected to an air compressor. This gives you a clearly specified pressure range for tyre inflation tasks. Integrated Pressure Gauge Features a built-in gauge for checking tyre pressure as part of the inflation process. Release the lever after inflating or deflating to read the pressure on the gauge. Twin-Sided Hold-On Connector The twin-sided connector is designed for access to inner and outer tyre valves on twin-wheel vehicles. This makes it suitable for tyre setups where both valve positions need to be reached. Lever-Controlled Inflation and Deflation Use the lever to control inflation or deflation while the connector is held on the tyre valve. Releasing the lever allows you to check the tyre pressure on the integrated gauge. 1/4-Inch BSPT Air Inlet The inflator uses a 1/4-inch BSPT air inlet for connection to an air line. It is designed to operate when connected to an air compressor. 75 cm Total Length The tyre inflator measures 75 cm in total length. This gives buyers a clear dimensional reference when assessing the tool for their equipment and working requirements. Specifications Brand: Randy Travis Machinery Product Type: Tyre inflator with gauge Functions: Inflation, deflation and tyre pressure checking Maximum Pressure: 160 PSI / 11 Bar Air Inlet: 1/4-inch BSPT Connector: Twin-sided hold-on connector Operation: Lever controlled Total Length: 75 cm Required Equipment: Air compressor Ideal For Vehicle owners checking and adjusting tyre pressure Workshops using compressed-air tyre inflation equipment Twin-wheel vehicles with inner and outer valves Garages needing a professional tyre inflator Air-line setups requiring a tyre pressure gauge Routine tyre inflation and deflation tasks Note: COM (change of mind) Return Policy: The product must be unopened and in brand new condition, with the return to be organised by the customer. Once received and verified to be in the condition specified, refund is only of the item value minus 15% restocking fee (not including initial shipping). An additional return charge, which is same cost as that of initial shipping, will be deducted from the refund on returns due to delivery failure caused by customer error. For the health and safety of our staff and other customers, we are unable to accept returns of personal use items.